23 nov. 2011

RIP: Controlling RIP Updates

Controlling RIP Updates


    
Make RIPv2 work.
r2 should not receive 3.0.0.0/8
r3 should not receive 2.0.0.0/8


With a prefix-list.
r1:

!
router rip
 version 2
 redistribute connected route-map CONNECTED->RIP
 network 12.0.0.0
 network 13.0.0.0
 distribute-list prefix F0/0 out
!
ip prefix-list F0/0 seq 5 permit 1.0.0.0/8
ip prefix-list F0/0 seq 10 permit 13.0.0.0/16ip prefix-list F0/0 seq 15 permit 12.0.0.0/16
!
route-map CONNECTED->RIP permit 10
 match interface FastEthernet0/0
!


r2:

!

router rip

 version 2
 redistribute connected route-map CONNECTED->RIP
 network 12.0.0.0
!
route-map CONNECTED->RIP permit 10
 match interface FastEthernet0/0
!

r3:

!

router rip

 version 2
 redistribute connected route-map CONNECTED->RIP
 network 13.0.0.0
!
route-map CONNECTED->RIP permit 10
 match interface FastEthernet0/0
!

With an acl.
r1:
!
router rip
 version 2
 redistribute connected route-map CONNECTED->RIP
 network 12.0.0.0
 network 13.0.0.0
 distribute-list 1 out
!
access-list 1 permit 1.0.0.0 0.255.255.255
!
route-map CONNECTED->RIP permit 10
 match interface FastEthernet0/0
!







-
Libellés : , ,

NTP - ACL

NTP - Network Time Protocol Packet types: -  Control messages : don't bother with this. -  NTP request/update messages: used for time sy...

  • Create a loopback Interface on MacOS
    Create a loopback Interface on MacOS X: ifconfig lo0 alias 172.16.123.1  will add an alias IP 172.16.123.1 to the loopback adapter ifconf...
  • Unicast Reverse Path Forwarding (uRPF)
    Unicast Reverse Path Forwarding (uRPF) uRPF est une feature permettant d'éviter l'IP Spoofing. Lorsque urpf est activé sur une in...
  • OSPF Authentication #1
    Three authentication modes: 0 - null, no authentication 1 - clear-text 2 - md5 Per interface authentication r1(config)# interface s1/...